FREE TOOL · PRMS SIZING
Add the equipment this station will feed and we'll recommend a capacity. This is a sizing estimate, not a final engineering spec, but it's a solid starting point before you talk to us.
Enter each piece of equipment's peak gas demand. If you only know its heat input in kW, switch the unit and we'll convert it for you.
Common conversions for reading equipment manuals and spec sheets from different sources.
| Flow rate | Equivalent |
|---|---|
| 1 Nm³/h | 35.31 SCFH (standard cubic feet/hour) |
| 1,000 Nm³/h | ≈ 35,310 SCFH |
| Pressure | Equivalent |
| 1 MPa | 10 bar ≈ 145 psi |
| 20 MPa | 200 bar ≈ 2,901 psi |
| 0.2–0.45 MPa | 2–4.5 bar ≈ 29–65 psi |
| Energy → flow | Equivalent |
| 1 Nm³/h natural gas | ≈ 10.5 kWh/h heat input (typical) |
It gives a reliable starting estimate based on your equipment's peak gas demand plus headroom. Final sizing should always be confirmed with us against your actual equipment specifications before you order.
We use a typical natural gas calorific value of about 10.5 kWh per Nm³. This is an approximation, actual gas composition can shift the figure by roughly 10%, which is one reason we confirm final sizing directly.
Send us your calculated figure, or your raw equipment list, and we'll confirm the exact unit and price.
Message us on WhatsApp